• HUBSAN X4 Pro High Edition Quadcopter with 1080p Camera and 3-Axis Gimbal

    $1,400.00 $1,250.00

    Capture Up to 1080p Video / 12MP Stills
    3-Axis Gimbal Camera Stabilization
    GPS-Based Flight Control System
    Smart Transmitter with Ground Station
    Built-In 7" Touchscreen for FPV
    1 GHz Android-Powered CPU
    Autopilot Flying w/ Waypoint Navigation
    Automatic Return to Home (RTH)
    Includes Removable Prop Guards
    The X4 Pro High Edition Quadcopter with 1080p Camera and 3-Axis Gimbal from Hubsan can - fully laden with gimbal and camera - boasts an expected flight time of up to 27 minutes, depending on conditions. Additionally, with all cargo removed (including camera and gimbal) flights of up to 40 minutes become possible. This bundle is classed ready-to-fly (RTF), meaning all essential hardware is included and only basic assembly - such as attaching the props with the included prop wrench - is required. The bundle includes the H7000, 2.4 GHz smart transmitter (handheld controller) with 7", 1280 x 720p resolution touchscreen and 5.8 GHz video receiver. Not only does it provide dual sticks for flying like a conventions RC transmitter; the touchscreen provides access to the ground station software plus real-time FPV monitoring of a standard definition video feed supplied by a transmitter on the aircraft.

    As with other multi-rotor systems, it features a GPS based flight control system. The enables very precise positioning, which is especially important when recording video, and provides enhanced flight stability compared to relying on gyro/IMU data alone. Thanks to the ground station system integrated into the transmitter, waypoint navigation is also possible. With this technology, you simply plot a point-to-point rout over a map using the device's touchscreen. If you change your mind, the waypoint course can be updated in-flight.

    Along with the quadcopter, transmitter, gimbal system, and camera, this bundle includes a 7000mAh 3S LiPo flight battery, a 5000mAh LiPo transmitter battery, battery chargers for the flight battery and transmitter battery, a sun shade for the FPV screen, a strap for the transmitter, a prop wrench, a set of prop guards, and antennas for the transmitter and video receiver.
    Air System Design
    Removable Props Guards
    The guards help protect the propellers from collisions as well as add an additional element of safety
    H7000 Transmitter And Ground Station
    2.4 GHz Radio System
    The control signal from the transmitter to the aircraft is sent over a 2.4 GHz frequency, avoiding interference from/with the 5.8 GHz video signal. The transmitter boasts a range of up to 3280.8'
    Auto Fixed Hover
    When released, the throttle sticks automatically return to the middle. At this point, the X4 Pro will stand in a fixed hover until the pilot takes control again
    Built-In 7" Android Mobile Device for Ground Station
    Not merely a handheld controller, the included smart transmitter features a built-in 7", 1280 x 720 resolution IPS touchscreen plus a 1 GHz dual-core CPU running the Android OS. This allows you to view a live feed from the camera plus OSD overlay data. Additionally, you can access to ground station software to plot or update waypoint-base autopilot courses. A dedicated 5.8 GHz receiver with cloverleaf antenna picks up the video signal, supporting a range of up to 3280.8'
    Gimbal Control Dial
    A rotary dial on the right side of the transmitter allows you to adjust the camera angle during the flight
    Plot Waypoint Based Autopilot Courses
    Use the ground station app's touch screen interactivity to place waypoints (makers) over a 3D map. This allows you to define an autopilot course that passes through a pre-defined set of locations. Additional parameters - like speed and altitude - can also be set
    OLED Screen
    In addition to the 7" display for FPV and the ground station, there is a separate OLED status display to keep the pilot apprised of important vitals - even when the main display is switched off
    Dedicated Switches
    Switch S1: Enable/disable Headless Mode for intuitive orientation of aircraft
    Switch S2: Altitude Mode and Position Mode selection
    Switch S3: Engage/disengage Return-to-Home (RTH) function
    Switch S4: Enable/disable Flight Course Mode
    Rechargeable LiPo Battery
    A 7.4V 5400mAh LiPo battery powers the transmitter - providing the juice it and the 7" ground station screen require
    Camera and 3-Axis Gimbal System
    Hubsan HBS1080P 1080p Action Camera
    For recording Full HD footage from that air the HBS1080P action camera is included. In addition to 1080p video at 30 fps it can take JPEG still as up to 4032 x 3024 resolution. It features an ultra-wide angle lens providing an FOV of up to 170°
    3-Axis Gimbal
    To keep the camera stabilized and the horizon level, a 3-axis gimbal is included. It features a control angle accuracy of 0.01°. Additionally it provides the following range of motion:

    Tilting: -160° to 160°
    Rolling: -50° to 50°
    Panning: -160° to 160°

    Besides the included HBS1080P, the gimbal also works with the GoPro HERO3, HERO3, and HERO4
    Flight Control System Functions
    Return-to-Home (RTH)
    Automatically bring the quadcopter back to a pre-defined "home point" with the flip of switch. The aircraft will also return home automatically if contact with the transmitter is ever lost
    Headless Mode - Intuitive Orientation
    In this mode there is no longer a defined "noise" and "tail". Instead the aircraft always moves relative to the pilot - forward pressing forward, left pressing left, and so on. This keeps flying more intuitive, especially for beginner pilots
    Altitude Mode
    In this mode the quadcopter will maintain a fixed elevation. Right/left, back/front movement is still possible, however
    Position Mode
    This mode uses GPS to maintain a fixed position when the pilot releases the controls