RADIOS Futaba 8JH 8-Channel 2.4GHz S-FHSS Computer Radio System with R2008SB Receiver

$395.00 $325.00

2.4 GHz S-FHSS Modulation
Heli-Optimized: Smooth Throttle Gimbal
Airplane and Helicopter Programming
20-Model Memory with 10 Character Names
Back-Lit LCD Screen
Multi-Function Jog Dial
3-Axis Gyro Support
6 Programmable Mixes (Two with Curves)
8-Channel S-FHSS Receiver Included

The 8JH 8-Channel S-FHSS 2.4GHz Computer Radio System from Futaba features a helicopter-optimized transmitter (radio controller) and receiver that can be used to control a multitude of RC aircraft, including fixed-wing planes and helicopters. The 8-channel transmitter supports receivers with the S-FHSS and FHSS protocols, such as the included S.Bus-compatible R2008SB. The receiver features Dual Antenna Diversity and comes equipped to handle high-voltage applications. The "H" in the model number indicates that the transmitter throttle gimbal is smooth rather than ratcheted, which is considered the preferred arrangement by many helicopter fliers.

The transmitter computer is able to store settings for up to 20 models and can transfer model data wirelessly between other 8J transmitters. It features size programmable mixes (two with curves), five helicopter flight conditions, 3-axis gyro support, and 5-point pitch/throttle curves. All the menus can be easily accessed and programmed with a jog dial and three buttons, with settings and data viewable on the transmitter's back-lit LCD screen.

Note: Transmitter requires four AA batteries. Servos not included.
System Features
8-channel transmitter compatible with Futaba S-FHSS and FHSS 2.4GHz receivers (4 channels only in FHSS mode)
Airplane and Helicopter modes
20-model memory
S.Bus-compatible S-FHSS receiver
Wireless transfer of model data to and from other 8J transmitters
10-character model and user naming
128 x 64 dot LCD display
8 channels (one variable knob, five 2-position switches, two 3-position switches, one momentary switch, two digital levers)
Quick and easy programming using a jog dial and three buttons
End point adjustment
Dual Rate/Expo (any switch selectable)
Servo reversing
Sub Trim on all 8 channels
Digital Trims
Trim Step adjustability
ATL (Adjustable Travel Limit)
Failsafe on all 8 channels
Trainer mode
Throttle cut
Two Count-up/Count-down timers plus integrated timer
Model timer
Range check mode
Servo Monitor/Test
Auxiliary Channel switch/level assignability
Airplane Mode
Six programmable mixes (two with curves)
Flaperons with differential rate
Flap Trim
Differential Ailerons
V-tail mixing
Snap Roll
Elevator/Flap mixing
Aileron/Rudder mixing
Flap/Elevator mixing
Gyro sensitivity
Throttle curve (5 points)
Pitch curve (5 points)
Throttle delay
Throttle/Needle mixing (5 points)
Idle down (any switch selectable)
Helicopter Mode
Six programmable mixes (two with curves)
8 Swash Plate types
5 Flight Conditions (normal, idle up 1, idle up 2, idle up 3, hold)
Throttle curve (five points/four curves)
Pitch curve (five points/five curves)
Throttle hold
Hover pitch mixing
Hover throttle mixing
Gyro sensitivity/mixing
Governor setting/mixing
Hi/Lo pitch mixing
Offset mixing
Revolution mixingCondition delay

Throttle mixing (swash>throttle) 
Throttle/Needle mixing (5 point curve) 
Swash AFR
Swash mixing
Electronic swash ring
Throttle delay